Mr. FrgimanThe machine can run well and produce great result .
AllisonIhr Unternehmen ist sehr beeindruckend.Nach der Inbetriebnahme arbeiten die Maschinen einwandfrei und erfüllen unsere Anforderungen.Wir sind sehr zufrieden Gutes Team!
Mr Riyaz ZaveriAfter visiting more than 5 companies. We choose Juneng as our partner . We trust this team and their quality . As it turns out that we are correct.
Fully Enclosed SS304 Agitated Nutsche Filter Dryer Filtering And Washing Machine
|Alias||Filtering And Washing Machine||Material||SS304|
|Operation||Fully Enclosed||Discharge||Controlled By Automatic Discharging Valve System|
|Filter Area||0.28 M2||Shell Diameter||600 Mm|
liquid filter drier,
Agitated Filter Dryer
Fully Enclosed SS304 Filtering and Washing Machine Agitated Nutsche Filter
In order to meet the confined production process, filtering washing machine, two -in-one filter has been developed. This production system can realize half automatic or complete automatic operation control.
Maily used for crystallization liquid filtration, washing, drying process. It includes: feeding, beating, filtering, washing, discharging, on-line inspection (optional), etc key steps to prepare for the cleanroom of next mixing process. Besides this Nutsche Filter Dryer also has CIP, SIP functions.
It could be used in various field such as fine chemical, petroleum, printing, foodstuff and pharmaceutical industries and so on.
Nutsche filter dryer are widely used for critical high purity separations of liquids and solids, and now being used in the cbd oil industry.
It is widely used for final step of cbd oil purity process. With pur critical operation as final step, the cbd crystalizing isolation can reach above 98%.
|Model||GXG 600 (2 IN 1 )|
|Filtration area||0.28 m2|
|Shell diameter||600 mm|
|Work pressure||-0.1~0.3 Mpa|
|Nominal volume||0.2 m3|
|Filter ckae height||150 mm|
|Discharge method||Controlled by discharge valve|
1 . Feeding
Open the feeding valve to feed in the tank, paddle should be in the upper position when feeding, if necessary, can be lowered stirring paddle for low speed stirring, so that the material is evenly distributed. When the material reaches the specified process stop feeding, close the feed valve
2 . Washing
Washing fluid at 0.2 ~ 0.3MPa pressure by the rotating nozzle cleaning, and stirring paddle has been suspended high.
Slurry washing: When a certain amount of washing liquid after the accession to stop adding gradually lower stirring paddle and pulp slurry at an appropriate speed stirring. Stir continuously from top to bottom.
3 . Filter
After washing, upper the stirrer to related position, stop stirring, the liquid will be discharged from bottom. Then repeat the filtering steps until you get perfect material.
If filter finish,make the material is similiar, then make the stirrer blade upper from material surface about 20mm.
4 . Material discharge
Sampling analysis before discharge, if ok, then discharge them.
First turn off the heating water valve, slowly open the cooling water valve. Slowly lower the stirring paddle, stirring material accelerated cooling, then the vacuum pump can be opened to exhaust heat.
Before open the discharge valve, pls fill pure nitrogen for balance protection. when the pressure is atmospheric pressure, the impeller through the thrust reverser action, the material discharged from the discharge valve.